cruise control in nissan qashqai

Nissan Qashqai Cruise Control Not Working? (5 Reasons Why)

Like with most cars, the Nissan Qashqai comes with great features like cruise control to enhance your overall drive. Cruise control focuses on helping you maintain your speed, but it may not always work properly.

You may be wondering why your Nissan Qashqai cruise control is not working. I did some digging, and here is what I learned!

Nissan Qashqai Cruise Control Not Working?

Nissan Qashqai cruise control would stop working because of a problem with the electrical system, which is normally a blown fuse, damaged relay, or a weak voltage source. Additionally, problems with the brake system, like a bad brake system, can make the Nissan Qashqai cruise control malfunction since cruise control systems are often connected to the brakes.

Are you interested to learn about more reasons why your Nissan Qashqai’s cruise control does not work? I compiled a list of reasons below, so read on!

1. Electrical Issues

Usually, the Nissan Qashqai’s cruise control stops working because there is an electrical issue in your car.

For instance, the most common reason why your cruise control would stop working is that you have a blown fuse.

Since your cruise control is an electrical system in your car, it will be controlled by fuses that allow power to flow to the electrical system and protect it.

If there was a short circuit or fault, the cruise control’s fuse will blow to protect the main electrical unit from damage.

However, this will also cause your cruise control to stop working since no electricity will flow to the cruise control system.

Generally, you can fix this by finding the fuse that is connected to your cruise control system and replacing it with a new and compatible fuse.

Another common electrical problem that you may have with your cruise control is a bad relay.

Relays are electric switches that open and close circuits, similar to how a normal switch would work.

When your relay gets damaged, the circuit will not open and close as needed, which means your cruise control may not turn on or off when you want it to.

Finally, voltage sources and wiring are common issues that can cause cruise control to malfunction in a Nissan Qashqai.

For example, having a faulty wiring harness or a bad connector can make the lessen or cut the flow of electricity to your cruise control system.

Another example is your voltage source, and normally the voltage source is an issue if there is not enough power being delivered to the cruise control system.

Usually, having a bad alternator or a dead battery may be the cause of a weak voltage source.

2. Brake System

Usually, another major reason why your Nissan Qashqai’s cruise control would have problems is that you have problems with your brake system.

Commonly, having a blown brake light is a cause of why your cruise control would stop working.

For instance, having one or both brake lights blow can disable your cruise control system, but this will depend on the kind of car that you have.

Usually, a brake light will blow out if you have had and used your brake lights for a long time.

Moreover, aftermarketing LED brake lights could also cause your cruise control to stop working.

Usually, this occurs because the new brake lights that you have may not be compatible with your car.

When this happens, your central control module may believe that your brake lights were blown even if they were not, which will in turn affect your cruise control system.

Finally, having a bad brake pedal switch could also make your Nissan Qashwai cruise control malfunction.

Typically, this is because your brake pedal switch is responsible for turning your brake lights on and off according to the position of your brake pedal.

Normally, most cruise control systems are designed to disengage your cruise control system once you hit the brake pedal.

If your brake pedal switch went bad, it can make your cruise control think that you engaged the brakes, which will then turn off your cruise control.

3. Speed Sensor

Generally, a car’s cruise control system is meant to maintain a car’s speed, which means that the cruise control will rely heavily on a car’s speed sensor.

A speed sensor is meant to measure the output of the transmission or transaxle or the wheel speed.

Therefore, speed sensors gauge for when the car would need traction, which is an essential measurement for cruise control.

When you have a bad speed sensor, you will not have an accurate measuring of your car’s speed, which can make your cruise control stop working.

Normally, you can tell that you have a bad speed sensor if you have inaccurate readings on your speedometer.

Additionally, your speedometer may behave oddly, such as randomly shooting up when you are maintaining a normal driving speed.

4. Control Switch Components

Typically, most cars will have the cruise control switch mounted on the car’s steering wheel, and having faulty control switch components can make your cruise control malfunction.

For instance, the steering wheel that holds the cruise control switch usually has a spiral cable.

When the spiral cable goes bad, it can make an open circuit that will keep the cruise control switch from making contact to the central control module.

Therefore, your cruise control would not turn on or off since there will be no relay to the central control module.

Additionally, there are internal contacts in the cruise control switch that can wear out due to damage or prolonged use.

Once the internal contacts in the car’s cruise control switch get worn out, it will not be able to properly contact your car’s central control module.

This would mean that your cruise control would either get disabled or not know when to cancel functions or accelerate.

5. Bad Vacuum Actuator, Hose, Or Cable

For older Nissan Qashwais with cruise control, the cruise control often stops working because of an issue with a vacuum actuator or throttle cable.

Typically, the vacuum actuator will cause the cruise control to malfunction once it is damaged.

For instance, there is a cable that links the throttle to the car’s actuator, and once the cable gets damaged, your cruise control would stop working.

Moreover, a vacuum leak can occur since the vacuum actuator has hoses or tubes in it.

Occasionally, these tubes or hoses can get damaged, so a small hole or tear in them can lead to a vacuum leak.

Once there is a vacuum leak, your vacuum actuator would struggle to work properly, which will then affect your cruise control system.

Typically, you can tell that you have a vacuum leak if you notice that your engine idles a lot higher than normal or if your engine creates a fuel trim code.

Generally, most Nissan Qashqai cruise control systems will stop working because of a problem in the electrical system or brake system.

However, other issues can lead to a malfunctioning cruise control system, such as a problem within the vacuum actuator or the speed sensor.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Welcome to Autoily.com! We are a group of passionate car, motorbike, RV, and pickup truck owners. Our aim is to provide concise, easy-to-understand, and useful information on vehicles, maintenance, and components.

© Autoily.com

Skip to content

• What's New?
• GAP Insurance
• Car History Check
• RAC Warranty
• Nissan QashQai Forums Nissan Qashqai Technical Forum Electronic systems

cruise control

Cruise control -->.

Post by supertonk » Sun May 12, 2019 8:35 am

Re: cruise control -->

Post by Noddy1875 » Sun May 12, 2019 12:27 pm

Post by Qashowner » Sun May 12, 2019 3:00 pm

Post by supertonk » Sun May 12, 2019 4:48 pm

Noddy1875 wrote: ↑ Sun May 12, 2019 12:27 pm Are you pressing the buttons in the right order ?

Post by DMW » Mon May 13, 2019 5:07 am

Post by MikeGC » Mon May 13, 2019 7:57 am

Post by supertonk » Wed May 15, 2019 8:23 am

Return to “Electronic systems”

• Nissan QashQai Forum Area
• ↳   Introductions
• ↳   Main QashQai Discussion
• ↳   Off-Topic Chat
• ↳   Members Gallery
• ↳   Spotted
• Nissan Qashqai Technical Forum
• ↳   Engine & Drivetrain
• ↳   Bodywork & Interior
• ↳   Electronic systems
• ↳   Chassis, Wheels & Tyres
• QashQai J12 (2021+) Forums
• ↳   General / Ordering Forum
• ↳   Nissan Qashqai e-Power Forum
• QashQai J11 (2014-2021) Forums
• ↳   General
• ↳   Reviews / Comments
• ↳   F.A.Q
• QashQai J10 (2007-2013) Forums
• Classifieds
• ↳   For Sale & Wanted
• ↳   Website Issues
• ↳   ALA - GAP Insurance Discount
• Other Nissan Forums
• ↳   Nissan Ariya Forum
• ↳   Nissan Pulsar Forum

Nissan Qashqai Forums

Our Nissan QashQai Forums are free to join and open to all.

Follow Nissan QashQai Forums

• Nissan QashQai Forums
• All times are UTC

5 Reasons Why Your Cruise Control Stopped Working

• Updated: March 15, 2023

It would be difficult to find a vehicle on the road today without cruise control. This invaluable feature makes driving long distances easier but can also cause trouble when it malfunctions. Understanding the reasons your cruise control stopped working ensures that you can get the problem fixed quickly for a more enjoyable ride. 

While this fault can cause issues with the cruise control system itself, there could also be an effect on the acceleration of your vehicle. That’s why you want to have it looked at as soon as you notice a problem. Let’s take a quick look at the reasons your cruise control may have stopped working.

Reasons Why Your Cruise Control Stopped Working

The most common reason a cruise control stops working is due to a blown fuse or a defective brake pedal switch . It can also be caused by issues with the throttle control system or the ABS. In older cruise control systems, it can be caused by a broken vacuum line.

Here is a more detailed list of the possible reasons your cruise control is not working:

1. Blown Fuse

All electrical systems in the vehicle are controlled by fuses. Your cruise control system is attached to a fuse that can blow if there is a short circuit or fault. Without a good fuse, the cruise control system can’t work at all.

Thankfully, it’s not difficult to find and replace a blown fuse. Look in the owner’s manual to find the fuse that corresponds with the cruise control technology. 

2. Defective Brake Pedal Switch

The brake pedal switch is responsible for turning the brake lights on and off based on the pedal position. Cruise control systems are designed to disengage whenever your brake pedal gets pressed. 

Because the cruise control is wired into the brake pedal switch, any fault can cause it to stop working. When the brake pedal switch malfunctions, the car believes the brakes are engaged, causing the system to turn off automatically. Not only that, but your car’s brake light might also be stuck on, leaving confused drivers in your wake. 

3. Malfunctioning Speed Sensor

Speed sensors are located on every wheel or differential. The purpose of these sensors is to monitor the speed of the wheels to determine if traction control is needed. 

The speed sensors are also part of the cruise control system. When a sensor fails, the cruise control can stop working and the speedometer might act strange as well. 

If there is an issue with a speed sensor, it will often show with an ABS warning light or a check engine light on the dashboard.

RELATED: 3 Symptoms of a Bad ABS Wheel Speed Sensor

4. Electrical Issues

The cruise control system is electronic, with many components working together to make the system operate. If the cruise control fails to work, you want to check the wiring harness and associated connectors for a fault.

You also need to ensure that the voltage source is supplying enough power to the system. Even the smallest fault can cause defects with the cruise control. In many cases, there can be an issue with the cruise control lever or buttons causing the cruise control to not engage.

If your cruise control buttons are located on the steering wheel it could also be caused by a bad clock spring, which is located behind the steering wheel.

Check the system with an OBD2 scanner to look for any trouble codes related to the cruise control.

RELATED: 5 Symptoms of a Broken Clock Spring, Location & Replacement Cost

5. Damaged Vacuum Actuator, Hoses or Cable (Older cruise control)

If you drive an older vehicle with cruise control, you might have an issue with the vacuum actuator or the cable that connects to the throttle. If there has been damage done to the vacuum hoses or the actuator, the cruise control will stop working altogether.

Additionally, the cable linking the actuator to the throttle must be in good shape. If it has been broken, the cruise control will fail. 

What is Cruise Control?

Cruise control is a feature that is used when you are traveling at a consistent speed. Cruise control was first introduced for automobiles in the 1950s. However, it took many years before it became a staple in the modern vehicle.

This electrical system allows you to set a predetermined speed and take your foot off of the gas pedal. If you are on a long drive, there is less fatigue because you don’t have to try to maintain your speed. Cruise control can also benefit fuel economy because the vehicle uses less fuel when traveling steadily. 

In newer cars, you might be able to find adaptive cruise control , which is a smart technology. Adaptive cruise control allows you to travel at a predetermined speed, but it also helps to maintain a safe distance from the vehicles in front of you with the help of sensors. With conventional cruise control, you need to take over when the car in front of you slows down, but that’s not the case with adaptive cruise control. 

There are also vehicles nowadays with not only cruise control, but fully self-driving vehicles . We will most likely see much more of this in the future.

Cruise Control Repair Cost

The cost to repair your cruise control system depends on what caused it to fail. If you need to replace a cruise control or brake switch, you might spend between $125 and $350, including parts and labor. However, the cost to change a fuse is only a few dollars and you can perform the replacement yourself in just a matter of seconds. 

On the other hand, when something major fails, such as the actuator, you could be looking at a much higher repair bill. In some vehicles, the cost to replace a cruise control actuator can cost more than $700. These costs rise if you drive a luxury vehicle or one that is difficult to get parts for. 

It might not seem immediately important for you to fix the broken cruise control, but this defective system can affect other performance aspects. You could start to notice issues with acceleration or have trouble with the speedometer. To play it safe, it’s always best to have the cruise control repaired as soon as you notice a problem.

Is there a fuse for the cruise control?

Yes. If the cruise control is installed from the factory, you should check your car’s owner’s manual for the fuse location. If it’s an aftermarket cruise control, you’ll need to follow the wires to find the fuse.

Does the brake switch affect the cruise control system?

Yes. The brake switch affects the cruise control system. The brake switch sends a signal to the cruise control system to let it know when the brakes are being applied for the engine to know when it should stop accelerating.

Will the cruise control work if the check engine light is on?

The cruise control function will be disabled when the check engine light is on in most car models, even if the cause of the check engine light is not the cruise control itself. This is mainly due to safety reasons.

Can a vacuum leak affect cruise control?

Older vehicles use vacuum to control the throttle for the cruise control, and in this case a vacuum leak can heavily affect the cruise control. However, modern cruise controls are fully electric and in most cases will not be affected by a vacuum leak if the check engine light is not illuminated.

Although many people may think that the cruise control system is unimportant and not worth spending money to repair, the problem can be caused by a faulty part that will affect the engine’s performance or durability. Therefore, it is best not to ignore the problem if your cruise control is not working without first diagnosing the car properly.

If your cruise control still isn’t working after trying all the tips in this article, it’s probably time to take it in for a professional opinion from a mechanic. It may be a more serious problem that requires replacement parts or repairs. In the meantime, drive safe and enjoy the open road!

Learn more:

• Brake Lights Not Working But Tail Lights Are? (How to Fix)
• Tail Lights Not Working But Brake Lights Are? (How to Fix)
• Brake Lights Stay On? (5 Causes & How to Fix it)

Categories: Electric , Troubleshooting

Related Posts

Latest Posts

• The Best & Worst Years Of Ford Explorer
• Best & Worst Years Of Toyota Corolla
• Best & Worst Years of Toyota RAV4
• When Should Your Child Switch To A Forward-Facing Car Seat?
• The Best & Worst Years Of Toyota Camry
• I Accidentally Put Premium Gas In My Car, What To Do?

• Forum Listing
• Marketplace
• Advanced Search
• General Discussion

2015 Qashqai j11, cruise control not working.

• Add to quote

Hi. My 2015 qashqai`s cruise control stopped working. I was driving along in cruise control when it suddenly jumped out of cruise mode and would not go back into it again. I read on here that it could be a faulty mass air flow sensor. I had my mechanic check the system and he replaced the air mass meter but it did not cure the fault. Cruise control can be switched on but you cannot set the speed, (pressing down on the toggle switch) My question is, are the air flow meter and the mass air flow sensor the same thing or do I need to replace the mass air flow sensor ? Thanks .  

It's very unlikely the MAF is causing your issue. Since it will activate but not set, the two most likely causes are a bad or misadjusted brake pedal switch, or a bad spiral cable causing the set switch to be inoperable.  

Thanks for that. I'll get my mechanic to check the brake pedal switch as the set switch is working as I am able to set the speed limiter, so it's probably the brake switch. Thanks again.  

Got the problem sorted. It was a plastic pipe between the turbo and the intercooler that had failed. This also caused the start/stop system to fail. Got the pipe replaced, car now drives like new again.  

Do you have a pic of this pipe or part number want to change mine but don’t know we’re to look  

• ?            
• 184.7K members

Top Contributors this Month

Because JavaScript is disabled within your browser, some features are not available. Please enable JavaScript in your browser.

• Intelligent Cruise Control
• Technology Library

Maintains a preset distance from the vehicle ahead, reducing the driver's workload

Intelligent Cruise Control (ICC) measures the distance from the vehicle ahead and controls acceleration and deceleration to automatically maintain a suitable following distance. This distance is adjusted according to the speed of the vehicle ahead, up to the preset speed, and the ICC speed settings set by the driver. ICC reduces the driver's workload during long journeys such as expressway driving or in traffic congestion situations.

The system controls vehicle speed in order to maintain a set distance from the vehicle ahead. Manual accelerator pedal operation is reduced in high speed driving or in traffic congestion, making the journey much easier for the driver.

System operation

When the ICC system detects a preceding vehicle driving in the same lane, the system controls acceleration and deceleration in order to maintain the preset distance between vehicles according to the vehicle's speed, up to the preset speed, and ICC speed range selected by the driver. If the preceding vehicle comes to a stop, the driver's vehicle will come to a standstill (within the limitations of the system) and the ICC system will cancel. In situations when the system may not be able to fully decelerate the vehicle due to the preceding vehicle rapidly decelerating, or a vehicle suddenly merges in front of the vehicle; the ICC system warns the driver with a warning chime and display alert. When the ICC system do not detect a vehicle driving ahead in the same lane, the system maintains the vehicle speed that was set by the driver. On some models such as the Skyline, the ICC system also modulates vehicle speed according to the size of a curve up ahead, utilizing the on-board navigation system information. After clearing the curve, the vehicle resumes the driver's preset speed.

System mechanism

The ICC system controls the acceleration and deceleration based on forward detection from a front-mounted radar sensor or front camera. Detection scope includes detecting a preceding vehicle in the same lane and the distance to it.

RELATED TECHNOLOGY

Intelligent 4X4 system

Assists drivers in smooth cornering by adjusting power output to the front and rear wheels

Intelligent Blind Spot Intervention (I-BSI)

Assist the driver to avoid a collision with lane changing by detecting vehicles in the blind spot

Intelligent Trace Control

Delivers confident cornering

Easy driving using only the accelerator pedal

• Car Technology
• Comfort & Convinience
• Autonomous Drive/Advanced Driver Assistance System

• Skip to main content
• ALL VEHICLES
• 100% ELECTRIC
• HYBRID & E-POWER
• Petrol & Diesel

• Book a Service
• Maintenance & Repair
• Seasonal Offers
• Nissan Accessories
• Nissan Insurance
• Nissan Warranty
• New Qashqai features

Intelligent Cruise Control (ICC) (manual transmission vehicles)

Failure to follow the warnings and instructions for proper use of the ICC system could result in serious injury or death.

ICC is not a collision avoidance or warning device. It is intended for motorway use only and it is not intended for congested areas or city driving. Failure to apply the brakes could result in an accident.

The ICC system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver's responsibility to stay alert, drive safely, and be in control of the vehicle at all times.

Always observe the posted speed limits and do not set the speed over them.

Always drive carefully and attentively when using either cruise control mode. Read and understand the Owner's Manual thoroughly before using the cruise control. To avoid serious injury or death, do not rely on the system to prevent accidents or to control the vehicle's speed in emergency situations. Do not use cruise control except in appropriate road and traffic conditions.

In the conventional (fixed speed) cruise control mode, a warning chime will not sound to warn you if you are too close to the vehicle ahead. Pay special attention to the distance between your vehicle and the vehicle ahead of you or a collision could occur.

The ICC system will maintain a constant set speed or keep a set distance from the vehicle in front of you up to the preset speed.

The vehicle travels at the set speed when the road ahead is clear.

The ICC system can be set to one of two cruise control modes.

Vehicle-to-vehicle distance control mode:

For maintaining a selected distance between your vehicle and the vehicle in front of you up to the preset speed.

Conventional (fixed speed) cruise control mode:

For cruising at a preset speed.

The ICC system cannot be operated when the speed limiter is on, see Speed limiter (where fitted) for additional information.

• (1) Distance switch:
• Changes the vehicle's following distance:
• Long → Middle → Short → Long
• (2) <RES+> switch:
• Resumes set speed or increases speed incrementally.
• (3) <CANCEL> switch:
• Deactivates the system without erasing the set speed.
• (4) <SET–> switch:
• Sets desired cruise speed, reduces speed incrementally.
• (5) Drive Assist switch:
• Master switch to activate the system.
• Cruise control operations (manual transmission vehicles)
• How to select Cruise Control modes (manual transmission vehicles)
• Vehicle-to-vehicle distance control mode (manual transmission vehicles)
• Vehicle-to-vehicle distance control mode operation
• Vehicle-to-vehicle distance control mode switches
• Vehicle-to-vehicle distance control mode display and indicators
• How to switch the ICC system off
• How to change the set vehicle speed
• How to change the set distance to the vehicle ahead
• Approach warning
• Acceleration when overtaking (where fitted)
• Automatic cancellation
• Vehicle-to-vehicle distance control mode limitations
• System temporarily unavailable
• ICC system malfunction
• ICC sensor maintenance
• Speed Limit Link - ICC and Steering Assist (where fitted)
• Speed Limit Link - ICC and Steering Assist with Navigation system (where fitted)

Nissan Qashqai 2024 Owners Manual

7.26.4. intelligent cruise control (icc) (manual transmission vehicles).

The ICC system cannot be operated when the speed limiter is on, see

• Distance switch:
• <RES+> switch:
• <CANCEL> switch:
• <SET–> switch:
• Drive Assist switch:

Nissan Qashqai

1.3 mhev 160pk xtronic automaat n-connecta / 1.800kg trekgewicht / adaptieve cruise control / 360* camera / keyless / stoel-, stuur- en voorruitverwarming.

• Merk Nissan
• Model Qashqai
• Commerciële uitvoering 1.3 MHEV 160PK Xtronic Automaat N-Connecta
• Kenteken 398006
• Kilometerstand 9.641 km
• Bouwjaar 3-2024
• Modeljaar 2021
• Leeftijd 6 maanden
• Carrosserievorm SUV / Terreinwagen
• Soort voertuig Personenwagen
• Nieuw of occasion Occasion
• Transmissie Automaat
• Motorinhoud 1.332 cc
• Aantal cilinders 4
• Vermogen 158pk (116kW)
• Topsnelheid 199 km/u
• Acceleratie 0-100 km/u 9,2 seconden
• Aandrijving Voorwiel
• Plug-in hybride Nee

Afmetingen en gewicht

• Massa ledig voertuig 1.368 kg

In- en exterieur

• Aantal deuren 5
• Aantal zitplaatsen 5
• Bekleding Stof
• Fabriekskleur Rood

Verbruik en milieu

• Brandstof Benzine
• Nevenbrandstof Elektriciteit
• Inhoud brandstoftank 55 l
• Verbruik gecombineerd 16,1 km/l
• Energielabel D
• CO2 uitstoot 143,0 gram per kilometer

Geschiedenis

• Datum eerste inschrijving 18-03-2024
• Datum eerste toelating 07-09-2024
• Datum tenaamstelling 07-09-2024
• Geïmporteerd Ja
• Prijs € 35.330,-
• Inclusief BPM Ja
• BPM € 8.937,-
• Wegenbelasting (gemiddeld per maand) € 75,-
• BTW/marge BTW
• Bijtellingspercentage 22 %
• BOVAG Garantie 12 maanden
• Fabrieksgarantie Ja, tot 18-03-2027
• Aantal sleutels 1
• Aantal handzenders 1

Financieel inzicht

De belangrijkste opties, toelichting aanbieder.

Modelreeks: 2021 - 2024 Emissieklasse: Euro 6d-TEMP APK: Nieuwe APK bij aflevering Motorrijtuigenbelasting: € 216 - € 235 per kwartaal Referentienummer: 398006 HERWERS.06

De Nissan QASHQAI 1.3 MHEV 160PK Xtronic Automaat N-Connecta uit 2024 is een moderne en goed uitgeruste SUV die zich richt op zowel comfort als veiligheid. Deze auto heeft een strakke rode afwerking en biedt een indrukwekkend trekgewicht van 1.800 kg, wat het een uitstekende keuze maakt voor bestuurders die een caravan of aanhanger willen trekken. De Nissan QASHQAI is uitgerust met een 1.3-liter mild hybrid benzinemotor die een vermogen levert van 157 pk (116 kW). Deze krachtbron is gekoppeld aan een automatische Xtronic transmissie, die zorgt voor een soepele en efficiënte rijervaring. Het brandstofverbruik ligt op 6,2 liter per 100 km, wat redelijk efficiënt is voor een SUV in deze klasse. Met slechts 9.641 km op de teller is deze QASHQAI praktisch nieuw en wordt hij geleverd met fabrieksgarantie tot 18 maart 2027, wat extra zekerheid biedt voor de komende jaren. Qua technologie en comfort is de QASHQAI rijkelijk uitgerust. De adaptieve cruise control maakt lange ritten comfortabeler en veiliger door de snelheid automatisch aan te passen aan het verkeer. De rondomzichtcamera, in combinatie met parkeersensoren voor en achter, maakt parkeren en manoeuvreren in krappe ruimtes eenvoudig. De auto beschikt ook over een dodehoekdetectie met correctie, wat een extra veiligheidslaag toevoegt bij het wisselen van rijstrook. Binnenin is de QASHQAI voorzien van stoffen bekleding en een scala aan technologieën zoals Apple CarPlay en Android Auto, waardoor je gemakkelijk je smartphone kunt integreren voor navigatie, muziek en handsfree bellen. Het digitale tellerinstrument zorgt voor een moderne uitstraling en biedt duidelijke weergave van alle rij-informatie. De airconditioning is automatisch, en voor extra comfort tijdens koude dagen zijn de stoelen, het stuur en zelfs de voorruit verwarmbaar. De QASHQAI is verder uitgerust met keyless entry en start, wat het in- en uitstappen vergemakkelijkt, en een draadloze telefoonlader, zodat je smartphone altijd opgeladen is. Het Lane Assist-systeem helpt om je veilig binnen de rijstrook te houden, terwijl de LED-verlichting zorgt voor uitstekende zichtbaarheid onder alle rijomstandigheden. De 18-inch lichtmetalen velgen en extra getint glas geven de QASHQAI een stijlvolle en sportieve uitstraling. Elektrische ramen voor en achter en elektrisch inklapbare spiegels bieden extra gemak, vooral in nauwe parkeerplaatsen. Al met al is de Nissan QASHQAI 1.3 MHEV N-Connecta een veelzijdige en goed uitgeruste SUV die voldoet aan de behoeften van moderne bestuurders, met een perfecte balans tussen comfort, technologie, en prestaties.

Herwers besteedt de uiterste zorg aan de juistheid en volledigheid van de gegevens. Hoewel de informatie permanent zo accuraat en actueel mogelijk wordt weergegeven zijn wijzigingen te allen tijde voorbehouden. Aan de inhoud van deze advertentie kunnen derhalve op geen enkele wijze rechten worden ontleend.

afleverpakketten

Herwers bovag basis pakket, herwers light pakket, herwers bovag plus pakket.

• 12 maanden BOVAG Garantie
• 100% Onderhouden

BOVAG 40-Puntencheck

• BOVAG Omruilgarantie

Contact de aanbieder

Voor vragen over de auto, de prijs of proefrit.

Deze Nissan staat bij:

Hazenkamp , 15 , 6836BA , Arnhem

Jouw inruilwaarde weten?

Vul je kenteken in en vraag aan

Jouw zekerheden

• Goed bevonden op 40 essentiële punten
• Zoals distributieriem, accu en remmen
• Uitgevoerd door een BOVAG-vakman

De zekerheden van viaBOVAG.nl

Ons totale aanbod.

• Select a car

Rent stations

• Discount system
• Franchising
• Operative leasing
• Rent with purchase
• About company

Convenient supply

A nice bonus for all guests: any cars rented from us, is possible to fed or back to the airport and railway station.

Car description

The all new Nissan Qashqai II is made in Russia and that made possible its deep adaptation to Russian roads and climate. This powerful, modern and stylish SUV, which gorgeous design attracts the glances with its clear-cut, impetuous lines and powerful silhouette of its body. Interior welcomes you with enough space for five passengers.

Rent cost Deposit is just 9,500 roubles

Nissan Almera IV AT

You can pick up and return your rental car at any place that is convenient for you. Spots may vary between where you pick up a car and where give it back.

Railway station

Subway station

Your address

Customer login, do you take a car from our company for the first time, subscribe to newsletter, call me back, password recovery.